Allurar Sinawa don Farantin Rikewa na Baya - Masu Kaya Masu Inganci da Maganin Masana'antu

• 🔩

  1. Amfanin Kayan Aiki

  ◎ An riga an taurare ramin ƙarfe na P20 zuwa tauri na 30-36HRC, wanda ke ba da damar yin aiki kai tsaye da juriya ga tsatsa; tushen ƙarfe mai nauyin 45# ana yi masa maganin zafi don cimma ƙarfin tauri wanda ya wuce 600MPa.

• ⚡

  2. Ginawa Mai Inganci Mai Kyau

  ◎ Tsarin mai gudu mai zafi ana sarrafa shi da zafin jiki don rage raguwar narkewa da nakasa, kuma tare da ƙofar gefe, yana cimma cika ramuka da yawa iri ɗaya.

• ❄️

  3. Daidaitaccen Sanyaya

  ◎ Tsarin tashar sanyaya ruwa yana tabbatar da daidaiton sarrafa zafin jiki na ±0.5℃, yana hana gurɓacewar samfur.

• 🔧

  4. Rushewar da ta dace

  ◎ Ɗaukar ƙofa mai nau'in pin da kuma farantin ejector suna aiki tare don biyan buƙatun rushewa na gine-gine masu rikitarwa.

• ↔️

  5. Daidaita Tsakanin Yankuna Biyu

  ◎ Haƙoran dama da hagu an tsara su daban-daban, sun dace da samfuran zare biyu, suna faɗaɗa yanayin amfani.

Tuntube mu yanzu don samun ƙima kuma ku fuskanci bambancin aiki tare da mafi kyawun a cikin kasuwancin.

AIKA SAKO

• Q Wane abu ake amfani da shi don ramin mold, kuma menene fa'idodinsa?

  An yi ramin mold ɗin ne da ƙarfe P20, wanda aka riga aka taurare shi zuwa 30-36HRC. Wannan yana ba da damar yin aiki kai tsaye ba tare da ƙarin maganin zafi ba, yana ba da kyakkyawan juriya ga tsatsa, kuma yana tabbatar da tsawon rai na aiki don samarwa matsakaici zuwa mai yawa.

• Q Ta yaya tsarin mai gudu mai zafi ke inganta ingancin gyare-gyare?

  Tsarin mai gudu mai zafi yana kula da daidaitaccen tsarin sarrafa zafin jiki don rage raguwar narkewa da nakasa. Idan aka haɗa shi da ƙirar ƙofar gefe, yana tabbatar da cikawa iri ɗaya a cikin ramuka da yawa, wanda ke haifar da daidaiton ingancin sassan da kuma saurin lokacin zagayowar.

• Q Menene daidaiton sarrafa zafin jiki na tsarin sanyaya?

  Tsarin tashar sanyaya ruwa ya cimma daidaiton sarrafa zafin jiki na ±0.5℃. Wannan matakin daidaito yana hana karkacewar samfur yadda ya kamata kuma yana tabbatar da daidaiton girma na sassan da aka ƙera.

• Q Waɗanne nau'ikan samfura ne wannan mold ɗin ya dace da su?

  Wannan ƙirar ta dace da amfani iri-iri, ciki har da sassan mota (wuta, kayan gyaran ciki), maƙallan masana'antu da masu haɗawa, kwantena na yau da kullun, kayan aikin lantarki, da sassan da aka yi amfani da su ta hanyar allura ta amfani da robobi na injiniya kamar PP, ABS, da PA.

• Q Shin wannan mold ɗin zai iya sarrafa samfuran da aka zana da hannu biyu?

  Eh. Tsarin tsagi biyu yana da haƙoran dama da hagu waɗanda aka tsara daban-daban, wanda hakan ya sa ya dace da samfuran zare biyu. Wannan yana faɗaɗa kewayon yanayi masu dacewa kuma yana rage buƙatar ƙira daban-daban.

• Q Ta yaya tsarin fitarwa yake aiki ga tsarin rikitarwa?

  Modulation yana amfani da haɗin ejector mai nau'in pin da farantin ejector suna aiki tare. Wannan hanyar ta hanyoyi biyu tana da aminci wajen sarrafa buƙatun rushewar sassan da ke da sarkakiya, yana rage haɗarin lalacewar sassan yayin fitar da su.